Nova Lactate QC Level 1 (4ml)

Ga naar het einde van de afbeeldingen-gallerij

Ga naar het begin van de afbeeldingen-gallerij

Disclaimer: Product op de foto kan afwijken van het daadwerkelijke product.

SKU

WD1604

Merk:

Nova

Batch:

2722213301

Houdbaar tot:

01-02-2025

Op aanvraag leverbaar

Nova Lactate QC Solution Level 1

Beschrijving

Run 2 different levels of the StatStrip Lactate Control Solutions during each 24 hours of testing prior to testing of patient specimens and under the following circumstances:

If a patient test has been repeated and the blood lactate results are lower or higher than expected
If there are other indications that the system is not working properly 30
As required by the institution’s quality control policy or local regulatory requirements
Anytime there is a concern the accuracy of the meter may have been affected by rough handling (such as dropping the meter)

Instructies

Gebruiksinstructies

How to perform quality control?

Insert a test strip into the meter. All segments of the screen will display for 2 seconds. Then a flashing blood drop will display.
Identify the sample as a Control; use the Left or Right button to find the desired control level: C1 and C2.
Touch the end of the test strip to a drop of control solution until the test strip fills and the meter beeps.
Lactate quality control test results are available on screen in 13 seconds
There is one long beep when the results are ready. There are 3 short beeps if test results are outside the measurement range of the test strip.